Showing posts with label Started. Show all posts
Showing posts with label Started. Show all posts

Wednesday, February 16, 2011

Woodturning Kits Give You Everything To Get Started In This Woodworking Hobby




Woodturning is a process of making, building, or carving something out of wood by the use of a machine called lathe. Unlike other types of woodworking, woodturning uses an immobile tool which cuts and shapes a moving wood.





The Tools Used in Woodturning Kits





The tools used in this art work are mainly made up of three variable forms of carbon steel, steel, high-speed steel, as well as powdered forms of metal. Among the three kinds of steel, the high speed steel tool upholds its efficacy longer and requires less frequent sharpening.





Listed below are some tools suggested for a woodturning kit:





• Roughing gouge - This is a broad fluted gouge which primarily rounds a spindle that is usually made up of wood, and to approximately form it. Due to the somewhat frail connection of the tang which connects the blade to its handle and the large cut it takes, it is not commonly used for cutting end grain. It is also dangerous for creating bowls or any other design or style of faceplate work.





• Spindle gouge or also known as the Detail gouge - This is a shallowly fluted gouge that places details on the different spindles, as well as beads (elevated sections of the turning usually in half circles within a particular cross section) as well as some coves (relieved sections of the turning).





• Bowl gouge - This is a deeply fluted gouge which is for rotating the outside as well as the inside parts of the vessels and bowls. Compared to a spindle gouge, it commonly has a thicker pipe as a shaft, plus a longer handle because it is created for cutting farther away from the hand rest and be able to deal with the forces required in turning a huge bowl.





• Skew chisel - This is a broad, sharply pointed chisel that has its rim running at a certain angle that covers the entire length of this particular tool. It is used to smooth out plane spindles, cut different types of beads, and put in a lot more details. Today, skew chisels are never used on faceplate work but only used on spindle work and are polished after sharpening to generate a razor edge.





• Parting tool - This is a pointed device that is used to divide (part off) work from this particular lathe, and to build a straight edge by means of dividing large as well as small diameter sections. Broad parting tools, which are also referred to as bedans, are utilized in order to make uniformly sized spindle sections.





• Hollowing tool - This tool has many different kinds and they are primarily used to cut out the deep portions of vases, hollow vessels, and steep bowls. They commonly appear as long-handled and this is for the purpose of keeping adequate leverage when you are working with a deep vessel, beyond the hand rest.





• Scraper - This is a device used to smooth out wooden items that were cut using other tools by scraping the fibers that are contained in the wood instead of cutting it. It also gives shape to materials that are impossible to do using other devices. A sharp scraper, especially the ones made today, has some sort of a burr that can be located at the edge that cuts the wood, but only a scraper that is not sharp actually scrapes.





• Bowl saver - This is a device used for coring out the inner part of a certain bowl. It saves the wasted wood material and allows it to be used to make a bowl of a smaller size and limits the quantity of wood chips made when making a certain bowl fairly hollow.





• Auger - This is a drill bit used to drill a hole half-way or all the way through a wooden item. It is used for creating a hole for a lamp cord which is the first step in shaping out a vessel or bowl.





• Chatter tool - a kind of scraper that is bendable and used to add beautiful and highly decorative designs to turned items.





• Wire - a plain wire that occasionally comes with handles at both or either sides used for burning lines into the piece with the use of friction.





• There are also different types of tools used for special purposes, and some are a combination of the tools mention above, like, thread cutting tools, skew/chisel combination, medium fluted gouges, ring cutting tools, etc.





Most of the tools mentioned above require more sharpening compared to tools used in other woodworking activities for the reason that these woods undergo a great speed.





Success Through Woodturning Kits





However, success in woodturning does not merely depend on the tools used but it also greatly depends on other important factors, like understanding the science of revolving bodies and points of tangency, harmony of mental and motor activities, development of technique and accuracy, and etc.





This may sound a little bit complicated to some but most people find woodturning pleasurable because it combines art, design, and science to create objects of beauty.


Tuesday, February 15, 2011

How To Get Started Turning Wood Pens




Although the craft of turning wood pens has been around for several decades, it recently has experienced somewhat of a revival. This is perhaps primarily due to the increased choices within the category of smaller mini-lathe power tools.





Another reason for the popularity of turning pens is the low start up investment in tools. Not only is the investment low, the tools used have a very long life span and could even be passed down to the next generation.





Listed below are the items to consider investing in to start pen turning:





o Lathe: This one should be obvious and you will find several options to choose from. The price for a new lathe will range between $100 to about $500 (all prices shown are March '08), depending on brand and features. I suggest you reading more about lathes in my ezine article reviewing the Jet Mini-lathe. In the article, I explain the process of how I chose my lathe.





o Turning Tools: I think you will need at least a gouge, parting tool, and scraper. Others may have a different list. One set of turning tools often recommended for stating out is the Harbor Freight lathe tool set that sell for less than $40. You can buy much better if you like, but this set will be more than adequate.





o Pen Mandrel: Think of the pen mandrel as a metal bar that fits between the "centers" of the lathe. The pen mandrel holds the wood blanks so you can turn them. There are several types available. I suggest you start with a collet closure mandrel, they offer a lot of flexibility when turning different lengths of blanks. You will spend about $20 or less for a good mandrel.





o Bushings: The bushings are used as a guide when turning your blanks to size for the specific pen kit you are building. You will want to buy the bushings sized for the pen you are turning. Be aware that pen kits and bushing from different manufactures may not be interchangeable. Later, when you develop more skill, you can use dial calipers to turn to size and you may choose not to use bushings at all.





o Drill Bit(s): Each style of pen will use a specific size drill bit to drill the hole for the brass tube. The most common is a 7mm used in the Slimline style. You can buy the drill bits individually or in a set. A set that many people use is a set of number, letter, and fractional drill bits from Harbor Freight. With a conversion chart, you will be able to find almost any size bit needed in this set. They often are found on sale at Harbor Freight for less than $40.





o Drill press or hand drill: Not much to say here, you are going to need something to turn the drill bits you bought. I've used a small bench drill press (less than $50) before and it worked fine. A hand drill will do, you just have to have a steady hand!





o Saw: Either a table, band, or a miter saw will work. The table saw and band saw are especially useful if you choose to cut you own pen blanks. Plan on spending a few bucks here, you and your budget will be the guide on this one. For more information on cutting your own pen blanks, see my ezine article on the subject.





o Clamps or bench vise: You will need something to press or squeeze the pen kit together. I've also used the bench drill press for this step.





o Pen Mill: This is a specialized tool, used to square your blanks after drilling and gluing in your tubes. You most likely will purchase the pen mill from the same place you ordered your kits. It will run about $20. Be aware there are several sizes of pilots available for the different pen kits or consider a complete kit with cutters and pilot shafts of different sizes. Usually the complete kit will be less expensive that buying the individual pilot shafts.





o Miscellaneous items: From here, we could go on and on. For starters you will need pen kits, pen blanks, CA (super) glue, and various grits of sandpaper. Likely, you will find you need other small items as you go, but these won't usually cost a lot of money.





For many of the larger more expensive items check eBay or Craig's List. Often you will find tools listed for sale at good prices on those web sites.





With this list, you will be well on your way to an exciting and enjoyable hobby that will last a lifetime. In addition, don't forget that with these tools not only will you be turning pens, but also bowls and other craft items. Indeed, it could even turn into additional part time income.





So what are you waiting for? Go ahead and get started.


Monday, February 14, 2011

A Basic List of Hand Tools Needed For Kids to Get Started in Woodworking




You can buy the tools that you don't already have as you get to them in the book or you can go ahead and buy them all at once. In the article below I give suggestions as to sizes and styles that can help children get the most out of their use. The advantage in having all your tools ahead of time is that it will save you from having to run around trying to find what you'll need the day before you start a new project just to find out it's sold out. Another advantage is you can often times find all the tools you need online at one site. This can save you time and money.





Here is a list of tools you'll need. Use this to compare what you already have to what you'll need to purchase. You can buy each child their own set (which would be nice since one of the first projects is a tool box) or they can share tools. (But getting kids to do that is an entire book unto itself.)





A. Measuring Tape (12') they make measuring tapes that have the fractions labeled on the tape to make it easier to read especially if your child is just learning about fractions.





B. Ruler (12") wooden ones are easier to read than the clear or colored plastic ones.





C. Hammer (7 - 10oz for smaller children, 16oz for older children with better hand eye coordination)





D. Screwdrivers: flathead and Phillips





E. Nail set





F. Handsaw (western or Japanese style)





G. Coping saw





H. Block plane





I. Brace Drill (Hand drill)





J. Rasp





K. Sandpaper (100, 120, 150, 180 grits)





L. Glue (white or yellow) water proof for outdoor projects





M. Screws and nails (a box each of 1 ¼" and 1 5/8" drywall screws and a box each of 3d, 4d, and 6d finish nails will get you through most projects in this book).





N. Clamps (See the lesson on building the step stool for information on clamps).





O. Safety glasses (it may take some extra effort, but find a pair that fits your child. They will become frustrated quickly if every time they start to swing a hammer they have to push their glasses back up on their noses. Manufactures do make child size glasses it just might take some looking around to find them.)





P. Combination square





Q. Speed square





Again, this isn't a complete list of the hand tools needed to build any project imaginable, but it's a great start. Armed with the above list of hand tools you can conquer all the projects in our book, "Woodshop 101 for Kids"


  © Blogger template The Professional Template II by Ourblogtemplates.com 2009

Back to TOP