Showing posts with label Chuck. Show all posts
Showing posts with label Chuck. Show all posts

Friday, March 4, 2011

An Introduction to the Wood Lathe Chuck




A wood lathe chuck can be an excellent addition to any wood lathe. A chuck allows one to turn smaller pieces of wood with a high degree of flexibility while avoiding the inconvenience supporting the wood with the tailstock.





Many people use wood lathe chucks for smaller projects. They are an absolutely necessary tool for anyone who would like to turn wooden bowls or similar items.





You can choose your wood lathe chuck from two different options. Three-jaw chucks center the wood in the lathe automatically and are well suited for symmetrical projects. That is because these chucks basically immobilize the wood, which means all rounding will be toward the true center of the wood. These are the lathe chucks with which most woodworkers first experiment. They produce great results, even though they are somewhat limited in what they can do.





A four-jaw wood lathe chuck offers more flexibility. These chucks allow the lathe user to move the wood during the turning process. This allows the operator to create rounded pieces that are not necessarily symmetrical or centered. These chucks are ideal for those who are handling very specialized aspects of custom projects and for artists who do not want to find themselves limited any more than necessary.





Suppliers provide three-jaw and four-jaw chucks in multiple sizes. A jewelry maker may find himself using a tiny, one-inch chuck. Meanwhile, a turner of a large wooden bowl may work with a chuck with a full two-foot diameter! There is a chuck for every project and every preference.





Your choice of a chuck size must be governed by two factors: the size of the lathe upon which the chuck will be used and the size of the wood pieces you plan to turn. Before you purchase a wood lathe chuck, double check your lathe's capacity and determine the chuck's intended use. That will help you to secure the right tool for your specific needs.





Lathe chucks can produce some amazing effects. Any lathe-using woodworker will be able to find a number of uses for these tools.





At the same time, it is important to note that these devices are best managed by experienced lathe users. That is particularly true of the manually manipulate four-jaw chuck. Additionally, numerous accidents occur when chucks become stuck. Anyone using a wood lathe chuck should make safety a top priority and should know the proper procedure for handling a stuck chuck.





If you are serious about woodworking and love your lathe, you can make it even more valuable, flexible and enjoyable by adding a three-jaw or four-jaw chuck to the mix. These great tools make it possible to use your lathe to complete a number of gorgeous products.


Thursday, February 17, 2011

Choosing a Woodturning Lathe Chuck




Before you start turning items on a lathe, you need to be able to securely hold the piece of wood in place. You can do this in one of several ways but the most common technique is by using a specialist woodturning chuck. This is also the safest method of holding your work while you concentrate on turning. A good quality chuck is made from high grade steel and will last you a lifetime.





Choosing a woodturning lathe chuck can be a problem because there are so many to choose from. These items are not cheap so if you were to buy several of them the costs would quickly add up. The best course of action is to decide what items you will be turning on the lathe. You can then choose the chuck that will best meet your needs. If necessary, you can purchase additional chucks at a later date when the need arises.





Instead of blowing your budget on several different chucks, you could do a lot worse than purchase a good all-rounder. The four jaw self centering scroll chuck featuring the dovetail jaw is a popular example. This chuck is extremely versatile, makes life easier and allows you to embark on a wide range of projects. The chuck is made of four steel jaws which open and close at the turn of a key. These come with interchangeable inserts which means they are compatible with all lathe spindles.





The screw chuck is ideal for turning bowls or rough turning stock. This chuck comes in numerous sizes and caters for specific project requirements. The bigger the piece of wood, the bigger the screw required to hold it securely. If you are turning a high volume of bowls, you may wish to consider investing in some specialist bowl chuck jaws. This is a good way of holding your work and eliminates the risk of damage or unsightly holes caused by a screw chuck.





The pin jaw chuck is designed for mounting bowls. This is done by expanding into a recess inside the bottom of the work piece. A dovetailed lip grips the wood securely allowing for safe and confident turning. On this chuck, the jaws work both ways by holding your work with inward or outward force. This means the pin jaw chuck comes in handy for turning small, intricate objects.





You can also make your own chuck from scrap wood mounted onto a faceplate. This is known as a jam chuck but does have some disadvantages. It is used mainly for finish turning as opposed to roughing out. Compared to the aforementioned examples it is inexpensive and quick to construct. Hopefully, after reading this article choosing a woodturning lathe chuck should be a relatively straightforward process.


Saturday, January 29, 2011

Lathe Chuck




The lathe chuck has been an important tool more or less as the antique Egyptians used a simple man-powered lathe to cut designs and forms into wood. Working with the ancient lathes requires two-man task. One person has been engaged in cutting tools to carve or shape the revolving piece of wood. The second person twisted the wood by using a bow and piece of cord or rope to work. Lathe chuck parts have become very dedicated to a variety of wood spinning and also metal functioning tasks and stock. At present, lathes are computer proscribed exactitude machines with limited similarity to most of its early forerunner.





The wood revolving lathe is the spirit of most DIY and profitable woodworking workshops. Lathe machines are accessible in a multiplicity of sizes, from small pen lathes that have a greatest capability of 2" stock to much better lathes than can spin stock as large as 10" or 12". The massive lathes are used to turn items such as bowls and vases. Wood lathe hurls are obtainable throughout a number of woodworking tool outlets, as well as a great number of online distributors. They offer discounted pricing and speed delivery service for wood lathe chucks. Lathe has been utilized as a woodworking tool almost as long as the knife and the sledge hammer. People have an attraction with wood and the products than can be fashioned with a lathe.





Machining centers get the splendor in most shops. They make the complicated cuts whereas CNC lathes frequently do little more than OD clean-up and facing. It makes the lathe more proficient than the machining core for many difficult jobs. Automotive contractor Hillsdale Tool demonstrates an illustration. Its plant is now using a CNC lathe to machine an element that once obligatory a machining center and a chopper. Generally the manufacturing time are saved to about 30 percent.





The part is lodging for a transaxle oil force gathering. Its most important characteristic is an amalgamation of non-concentric ring-shaped surfaces making up the hollow space of the part. If these surfaces were concentric, they would create a spherical ring between them.Lathe chuck is considered for perpendicular whirling centers in which contaminants hamper procedure dependability. The lathe chuck proffers high securing forces and long jaw stoke up, in a small-summary chuck body. Clamping forces ranges from 95 kN to 330 kN, with jaw strokes ranging from 9 mm to 15 mm per jaw.





Sizes ranging from 165 mm to 500 mm are available.It is highly necessary to protect eye and ear when working in a wood working shop. For the requirement of the parts of wood lathe such as a wood lathe chuck, it is best to contact the manufacturer for the specific brand of wood lathe and find out where the parts are available. Especially while replacing the wood lathe chuck it is needed to ensure the part fits perfectly.


  © Blogger template The Professional Template II by Ourblogtemplates.com 2009

Back to TOP